Setting
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to “Resetting the Filter Counter” on page 61.
Fig..1 Filter warning icon
Filter warning icon appears on the screen at a set time.
Note:
This icon also appears at turning on.
Note:
The Filter warning icons (Fig.1) will not appear when the Display function is set to Off (p.48), during Freeze(p.27), or No show (p.28).
Warning log
This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.
Note:
When the Factory default function is executed, all the warning log records will be deleted.
Factory default
This function returns all setting values except for the User
logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.
Filter counter
Press the SELECT button to select Timer, and
then use the Point ▲▼ buttons to set the timer. Select from (Off/ 100H/ 200H/ 300H) depending on the use environment.
Factory default
|
|
Lamp control |
|
Remote control | Code 1 |
Security |
|
Fan | L1 |
Fan control | On 1 |
Lamp counter |
|
Filter counter |
|
Warning log |
|
|
|
Factory default |
|
58
