Video Input

Sharpness

Press the Point button to decrease the sharpness of the image; press the Point button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off

Disabled.

L 1

Lower reduction.

L 2

Higher reduction.

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off

Disabled.

L 1

For an active picture.

L 2

For a still picture.

Film

For watching a film. With this function, the

 

projector reproduces pictures faithful to the

 

original film quality.

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point

button or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 42.

Note:

Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.41).

Store Menu

A confirmation box appears and then select Yes..

44

Page 44
Image 44
Sanyo PLC-XU106K Video Input, Store Menu, Noise reduction, Off Disabled Lower reduction Higher reduction Progressive