Setting
Ceiling
When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Power management
For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.
Select one of the following options:
Ready | When the lamp has been fully cooled |
| down, the POWER indicator changes |
| to green blinking. In this condition, the |
| projection lamp will be turned on if the |
| input signal is reconnected or any button |
| on the top control or remote control is |
Shut down | pressed. |
When the lamp has been fully cooled | |
Off | down, the power will be turned off. |
Power management function is off. | |
Timer | If the input signal is interrupted and |
| no button is pressed for more than |
| 30 seconds, the timer display with No |
| signal appears. It starts the countdown |
| until the lamp is turned off. Use the Point |
| ▲▼ buttons to set the Timer(1~30Min.). |
Note:
Factory default is Ready: 5 Min.
Ceiling
Rear
Power management
Time left before Lamp is off.
Language |
| English |
|
Menu position |
|
|
|
Auto setup |
|
|
|
Keystone |
|
|
|
Background |
| Blue |
|
Display |
| On |
|
Logo |
|
|
|
Ceiling |
| On |
|
Rear |
| On |
|
|
|
|
|
Power management |
| ||
| Off |
| |
On start |
| Off |
|
Closed caption |
| CC1 |
|
Standby mode |
| Eco |
|
1/2
52
