Power control and status check
About projector condition
Status | Description |
|
|
Normal | Projector is operating normally. |
Power management in operation | Power management is operating |
Shutter management in operation | Shutter management is operating |
Lamp failure | Lamp failure is occurring |
Abnormal temperature | The temperature of the projector became too high |
Stby after Abnormal Temp | Projector detects abnormal temp. and sets into standby mode. |
Power failure | Power failure has occurred inside the projector. Projector is turned |
| off. Unplug the AC cord and ask servicing to a qualified service |
| personnel. |
When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [2] on Setting main menu. (+p.41)
ENGLISH
33
