Ting, Why am I not receiving E-mail alert messages? | Sanyo Proj05

Q&A

Operation

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the setting

is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both

the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. Please consult your network administrator.

QHow many numbers of the E-mail address can I register in the E-mail set-

ting page.

AYou can register up to 10 addresses.

QWhy am I not receiving E-mail alert messages?

A Make sure that the registered E-mail address and SMTP server address are correct. If

the SMTP server is located in your LAN (Local Area Network), the address should be set to the SMTP server in your LAN. The SMTP server located outside of your LAN

may not be available for security reason. For further information please contact your network administrator (☞ p.25).

ENGLISH

59

Image 59

Sanyo Proj05 owner manual Ting, Why am I not receiving E-mail alert messages?

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Compliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Trademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to an Ethernet cable Network icon Network configuration Description Network PIN code Network PIN code screen Key pallet Move key Network information Network factory default Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menu Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Indicates the serial number of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the model name of the projector Network PIN code setting Sets Dhcp configuration ON/OFF Network configuration Mail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addresses Error message for sending alert mail Setting POP server Examples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ information Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Popup confirmation window Power control and status checkService in need Displays the status of the projectors power. Refer to next Status Description About projector condition Input Control Item Description Input signal are listedSystem Image mode Video Computer Image adjustment PC adjustment Screen setting Setting up the projector Right buttons to adjust them quickly Adjusts the image zoom in and outAdjusts the focus of the image Resets the Screen settings Setting Screen during the startup. User Default, OFFRemote control Sets on or off the logo display on Frequency.............When Frame lock is set to Auto Video delay control....Sets the digital processing Items Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connection To another network Gateway Router installed in the network Use the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Ting Why am I not receiving E-mail alert messages? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KE2AL