Control, Input | Sanyo Proj05 guide

Chapter 4 Controlling the Projector

Control

Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items.

✐Please see the owner's manual of the projector to have the further information of each control item.

Input

This function is to select the input mode and source mode of the projector. Click Set but- ton after selecting the input and source mode.

34

Item	Description
Input	Selects input mode of the projector.
Source	Selects signal source of the input.
	Input1 :	RGB(PC analog)
		RGB(PC Scart)
		RGB(PC digital)
		RGB(AV HDCP)
		HDMI
	Input2 :	Video
		Y, Pb/Cb, Pr/Cr

RGB

S-video

✐The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display. For further information , refer to the projector's owner's manual.

✐ When the projector is in standby, all the controlling items are inactive.

Image 34

Sanyo Proj05 owner manual Control, Input

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Compliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Web Management function +p.31 Network specifications of the projector Required operating environment for computers Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to an Ethernet cable Network configuration Network icon Description Key pallet Move key Network PIN code Network PIN code screen Network factory default Network information Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Indicates the model name of the projector Initial settingSets the Network PIN code to login the setting page. +p.23 Indicates the serial number of the projector Network PIN code setting Network configuration Sets Dhcp configuration ON/OFF Mail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / Delete Setting POP server Error message for sending alert mail Examples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optional Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need Popup confirmation window About projector condition Status Description Control Input System Input signal are listedItem Description Image adjustment Image mode Video Computer PC adjustment Setting up the projector Screen setting Resets the Screen settings Adjusts the image zoom in and outAdjusts the focus of the image Right buttons to adjust them quickly Setting Sets on or off the logo display on Default, OFFRemote control Screen during the startup. User Video delay control....Sets the digital processing Frequency.............When Frame lock is set to Auto Information InformationItems Description Network Indication of the filter status Indication of the lamp statusStatus Controlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connection Gateway Router installed in the network To another network Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Why am I not receiving E-mail alert messages? Ting What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KE2AL