Sanyo Proj05 System, Available selection at the RGBPC analog input, English, Control, Description

Control

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Select a system and then click Set button.

Available selection at the RGB(PC analog) input

Item	Description
XGA1	It automatically switches to the proper computer system of the input signal.
	* The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet
	the input signal are listed.

Available selection at the RGB(PC digital), RGB(AV HDCP), HDMI input

Item	Description
D-XGA	It automatically switches to the proper computer system of the input signal.
	* The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet the
	input signal are listed.
D-480p	It automatically switches to the proper scanning system of the input signal.
	* The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i, D-1080i
	and D-1080p.

Available selection at the Video/S-video/Scart input

Item	Description
AUTO	It automatically switches to the proper color system of the input signal.
	* The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the Y,Pb/Cb,Pr/Cr input

Item Description

........................AUTO	It automatically switches to the proper scanning system of the input signal.
	* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i and
	1080p.

ENGLISH

✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (☞ p.37) is available, they are also listed together with the above mode.

35