Chapter 4 Controlling the Projector
Image adjustment
This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.
Item | Description | |
Contrast | Adjusts picture con- | |
Brightness | trast. (0~ 63) | |
Adjusts picture bright- | ||
Color | ness. (0~ 63) | |
Adjusts picture color | ||
Tint | saturation. (0~ 63) | |
Adjusts picture hue. | ||
BrilliantColor | (0~ 63) | |
Applies improved | ||
|
| color performance |
|
| with the BrilliantColor™ |
Color temp | technology. (ON, OFF) | |
Sets a color temperature | ||
|
| mode. (XLow, Low, Mid, |
White Balance |
| High, Adj.) |
|
| |
Red, Green, Blue | Adjusts each white | |
|
| balance respectively. |
|
| (0~ 63) |
*When Color matching is set to "On" and changing the "Target" value of "Advanced color match- ing", the color temp. indicates "Adj."
Offset
Red, Green, Blue | Adjusts each offset |
Sharpness | respectively. (0~ 63) |
Adjusts picture sharpness. (0~ 31) | |
Gamma | Adjusts brightness of darker part of the picture. (0~ 15) |
Noise reduction | Switches noise reduction mode (ON, OFF) |
Progressive | Switches progressive mode (ON, OFF, Film) |
Reset | Resets the Image adjustment to previous levels. |
Store | Stores the Image adjustment values. Select an item [Image1 - Image10] |
| from the |
Load image mode..............Loads the Image mode. Select an image mode from the
and click Load button. There may not be available mode depending on the input mode as shown in the table left.
36
Input source
Image mode Video Computer
Standard | 4 | 4 |
Cinema | 4 | * |
Real | * | 4 |
Dynamic | 4 | 4 |
Image1 - 10 | 4 | 4 |
✐The mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".
