Sanyo SCP-2300 Making a 10-4 Call by Entering a Number, Missed Call Notification for 10-4 Calls

Making a 10-4 Call by Entering a Number

1.From standby mode, enter the 10-4 number you want to dial.

2.Press to place the 10-4 call.

The contact’s name appears if there is a matched number in your 10-4 List.

3.Continue with the 10-4 call, pressing and holding to speak and releasing it to allow others to reply.

4.When the call is finished, press .

– or –

1.Press 10-4(left softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), highlight Enter 10-4#and press .

3.Enter the 10-4 number you want to dial.

4.Follow steps 2-4 above.

Missed Call Notification for 10-4 Calls

When an incoming 10-4 Call is not answered, the Missed Call Notification is displayed on your screen.

To call the last Missed 10-4 Call:

Simply press and hold while the Missed Call Notification is displayed. (Continue with the 10-4 call as described previously.)

To display the Missed 10-4 Call Log:

Press View (left softkey). To call the entry, highlight the entry

you want to call, and press and hold . (Continue with the 10-4 call as described previously.)

Note: When you display Missed Calls entries, you will see the icon next to the name. Once you confirm the entry by pressing , the icon turns to the icon. The icon will remain until you make or receive a 10-4 call to or from the entry.

96