indicates you have new caller’s message.
indicates the Screen Call Auto setting is ON.
indicates your phone is in TTY mode.
indicates Headset mode is set to
indicates the speakerphone mode is set to ON.
Turning Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press .
Once your phone is ON, it displays “Looking for service...” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for service by pressing any key (when your phone is turned ON).
Tip: The Power Save feature helps to save your battery power when you are in an area where there is no signal.
Turning Your Phone OFF
Press and hold until you see the powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
5