Using One-Touch Speed Dialing

With this feature, you can dial Speed Dial entries using one key press for locations 2-9. (See page 63 for storing a Speed Dial number.)

To use speed dial for voice calls:

From standby mode, press and hold the appropriate key for approximately two seconds.

– or –

From standby mode, press the appropriate key and

press or .

The display confirms that the number has been dialed when it shows “Connecting...”.

To use speed dial for 10-4 calls:

From standby mode, press the appropriate key then press . (See “Setting Speed Dialing for 10-4 Entries” on page 107.)

The display confirms that the number has been dialed when it shows “10-4 calling...”.

21

Page 27
Image 27
Sanyo SCP-2300 manual Using One-Touch Speed Dialing