VIDEO CASSETTE TAPES
Correct tape thread check function
This function checks to make sure that the cassette has been correctly loaded so that recording can be carried out.
NOTES:
Setting the Action to Take When a Cassette is Loaded
You can set the mode the VCR will go into when a cassette is loaded.1 PressSTANDBY/ONthe button.
| 2 PressMENU button to display the MAIN MENU. | |
œ After the cassette tape is load d, the mechanism will | ||
operate for about 5 seconds to check that the tape | ||
| 3 TurnJOGthedial to select the“3.GENERAL SET” | |
has been threaded (loaded) correctly automatically | ||
and the cassette“o” will flashindicatorduring that | line, then turn the SHUTTLE ring clockwise. | |
ø The (GENERAL SET) menu appears. | ||
period. If the tape is not loaded properly, the cassette | ||
| ||
will be ejected. | 4 TurnJOGthedial until the“TAPE IN MODE” setting |
SHUTTLE ring is turned during the tape thread check operation, the command will only be executed after the tape thread has been checked. Only theEJECT button will operate while the tape thread is being checked.
œIf“TAPE IN MODE” in the (GENERAL SET) menu is set to “REC”, the recording indicator “m” will light while the tape thread is being checked. However, recording will only start after the tape thread check is completed.
is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.
STOP . . . . . . When tape inserted the VCR, stays in stop modeREC . . . . . . . When tape inserted the VCR, goes into recording mode6PressMENUtheEXIT button.1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.
øThe (GENERAL SET) menu appears.
Setting the Type of Tape Used
1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@01:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y
4TurnJOGthedial until the“THREAD CHECK” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.
øThe (GENERAL SET) menu appears.
4TurnJOGthedial until the“TAPE” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to set the tape length, then turn the SHUTTLE ring clockwise.6PressMENUtheEXIT button.
6PressMENUtheEXIT button.
English | 15 |