Sanyo SRT-8040P Setting the Mode at the End of the Tape, Setting the video input signal, JOG, dial until the, SHUTTLE ring clockwise, 6PressMENUtheEXIT button

NORMAL RECORDING

Setting the Mode at the End of the Tape Setting the video input signal

You can select the mode on the VCR when the tape reaches the end during recording.

1 PressSTANDBY/ONthe button.

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.

øThe (GENERAL SET) menu appears.

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@01:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

CLOG@DETECT.@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

VERTICAL@SYNC@@@@Y TAPE@@@@@@@@@@@@@E-240

4TurnJOGthedial until the“TAPE END MODE” setting is highlighted, then turn the SHUTTLE ring clockwise.

5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

œSetting when not using Autorepeat recordingREW. . . . . . . Rewinds the tape to the beginning, then goes to stop modeSTOP . . . . . . Goes to stop mode EJECT . . . . . The cassette is ejectedœSetting when using Autorepeat recording

REPEAT1. . . Autorepeat recording mode is automatically canceled if there was an alarm trigger

REPEAT2. . . Autorepeat recording mode is active even if there was an alarm trigger

6PressMENUtheEXIT button.

The video input signal during recording can be set to either colour or black & white.

1 PressSTANDBY/ONthe button.

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.

4TurnJOGthedial until the“VIDEO” setting is highlighted, then turn the SHUTTLE ring clockwise.

5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

COLOR . . . . For recording in colourB/W . . . . . . . For recording in black & white

6PressMENUtheEXIT button.

NOTES:

œSet“COLOR”to for systems which include colour signals (including cases where black & white signals are mixed in), and set to “B/W” for systems which only use black & white signals.

œUse the same setting for reco

œIf tapes that have been recor played back when“COLOR”,the settingthe recordings will not be played back in colour.

œIf using a black &“B/W”white. came

Recordings will not be made in colour even if “COLOR” is set.

22 English