Sanyo SRT-8040P Setting the Tape Management Function, TAPE MANAGEMENT, JOG, JOG, JOG, MENU, setting, Once the, EXIT button, dial until the, dial until the, dial until the

TAPE MANAGEMENT

Setting the Tape Management Function

1 PressSTANDBY/ONthe button.

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“6.TAPE MANAGEMENT” line, then turn the SHUTTLE ring clockwise.

øThe (TAPE MANAGEMENT) menu appears.

<TAPE@MANAGEMENT>

*TAPE@MANAGEMENT@@@@N

*PROTECT@DAY@@@@@@@30

*REC@PASS@SET@@@@@@10

*GROUP@NO.SET@@@@@OFF

*OVERRIDE@@@@@@@@@@@N

4 TurnSHUTTLEthe ring clockwise.

5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

N. . . . . . . The tape management function is not active.Y. . . . . . . The tape management function is active.

When setting to“Y”, please continue with the settings below.

6TurnJOGthedial until the“PROTECT DAY” setting

is highlighted, then turn the SHUTTLE ring clockwise.

7TurnJOGthedial to select the desired number of days to protect the tape, then turn theSHUTTLE ring clockwise.

OFF . . . . The tape is not protected.

1-255 . . . Number of days to protect the tape (prevent over-recording), from the date of the last recording on the tape (or the last expected recording date (calculated using the tape length (E-180 or E-240) and the recording speed)).

8TurnJOGthedial until the“REC PASS SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

9TurnJOGthedial to select the desired number of re-recording times, then turn theSHUTTLE ring clockwise.

OFF . . . . The number of re-recording times will not be checked.

1-100 . . . Maximum number of re-recording times. (Refer to“Concerning the Number of Times Tapes can be Rerecorded on” on page 20.)

NOTES:

œSince data is read before i number of times will be incr recording is stopped before

œDuring autorepeat recording times count will be updated rewound to the beginning. Au will proceed even if“RECthe cou

PASS SET” setting.

FTurnJOGthedial until the“GROUP NO. SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

GTurnJOGthedial to select the desired group number, then turn theSHUTTLE ring clockwise.

OFF . . . . The group number will not be checked.1-15 . . . . Group number setting.

HTurnJOGthedial until the“OVERRIDE” setting is highlighted, then turn the SHUTTLE ring clockwise.

ITurnJOGthedial to select the desired override mode, then turn theSHUTTLE ring clockwise. (Refer to “Tape Management Conflict Display” on the next page.)

N. . . . . . . Only EJECT button operation is accepted after a conflict has occurred.

NOTE:	Y. . . . . . . The next operation is accepted after a
	conflict has occurred. This will override

œSince the last expected recording date is a setting.

calculated date (using the tape length (E-180 or J PressMENUtheEXIT button.

E-240) and the recording speed), it may be

different from the actual last recording date, due

NOTES:

to other settings such as alarm recordings, programme timer recordingsœ andOnce theholidaytape managementsettingsdata is recorded. on

tape, it cannot be changed.

œThe criteria (condition) for based on the data recorded on settings in the (TAPE MANAGEM

English 17