CLOCK ADJUSTMENT
The time for the second and subsequent VCRs can be set to the same time as the first VCR.
A signal from a separate device can also be used to set the time for the second and subsequent VCRs to the same time as the first VCR. When using the signal from a separate device to set the time, input a 0 V signal to the CONTROL IN terminal of the first VCR for 100 ms or longer.
1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.
4TurnJOGthedial until the“CLOCK ADJUST” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to set the hour at which the adjustment will be conducted, then turn the SHUTTLE ring clockwise.
Example
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@03:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y
6PressMENUtheEXIT button.
The setting procedure on the first VCR is now completed.7 Repeat the procedure for a “CLOCK ADJUST” (to the same time as set on the
first VCR).
NOTE:
œThis function will not operate summer/standard time is change
NOTE: | Connection |
| |
|
|
| |
| VCR No. 1 | VCR No. 2 | |
œ The clock adjustment“00:00”cannot. | be set to | ||
|
| CONTROL IN COM CONTROL OUT | CONTROL IN COM CONTROL OUT |
To CONTROL IN terminal
To COM terminal
SELECTING INPUT AND OUTPUT TERMINALS
The input and output terminal signals can be selected so 5 TurnJOGthedial to select the desired mode, then
| that the VCR can be connected to older models of VCR. | turn theSHUTTLE ring clockwise. |
1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“9. OTHERS” line, then turn the SHUTTLE ring clockwise.
øThe (OTHERS) menu appears.
<OTHERS>
*ALARM@LOG
*POWER@FAILURE/DEW
*TERMINAL@SET@@@@SET1
4TurnJOGthedial until the“TERMINAL SET” setting is highlighted, then turn the SHUTTLE ring clockwise.
SET1 . . . . . . . . . . . . . . According to indication on back panel. (Select when not connecting to an older model.)
SET2 . . . . . . . . . . . . . . CONTROL IN is set to CLOCK IN, SERIES IN is set toEJECT IN, CONTROL OUT is set to CLOCK OUT and TIMER OUT is set toEJECT OUT. (Select when connecting to an older model.)
6 When finished,MENU EXITpressbutton. the
NOTE:
œ If set“SET2”,tothe “SERIES REC” line will not appear in the (ALARM/SERIES REC SET) menu.
English | 39 |