Sanyo SRT-8040P ALARM RECORDING, Alarm Recording Setting, JOG, recording, 24H (18H), recording, 40H (30H), recording, already set, dial until the, SHUTTLE ring clockwise

ALARM RECORDING

By connecting theALARM IN terminal to a normally	6 TurnJOGthedial to set the desired alarm recording
open door switch, an interphone, etc., a recording can be	speed, then turn theSHUTTLE ring clockwise.
done only when necessary.	8H (6H). . . . . . . . . . . . . 8-hour (6-hour) mode
	8H (6H). . . . . . . . . . . . . 8-hour (6-hour) mode
Alarm Recording Setting		recording
Alarm Recording Setting	24H (18H)	. . . . . . . . . . 24-hour (18-hour) mode
Alarm recording is performed when there is an input		recording
Alarm recording is performed when there is an input
(trigger) at theALARM IN terminal.	40H (30H)	. . . . . . . . . . 40-hour (30-hour) mode
œ Make all necessary connections.		recording
	NC . . . . . . . . . . . . . . . . Recording at the speed
œ The alarm triggers are received while in recording,
stop and stand-by modes.		already set

œFollowBeforethestarting steps, under“NORMAL RECORDING”.

1PressMENUthebutton to display the MAIN MENU.

2TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.

øThe (ALARM/SERIES REC SET) menu appears.

*ALARM@SET

@@MODE@@@@@@@@@@@Y1

@@SPEED@@@@@@@@@@8H

@@DURATION@@@@@@@20S

*1@SHOT@SET

@@FIELD@@@@@@@@@@1

@@INTERVAL@@@@@@@1M

*SERIES@REC@@@@@@N

*TAPE@END@OUT@@@@8:00

œIndicated in brackets are t

“TAPE” is set to “E-180” in the (GENERAL SET) menu.

7 TurnSHUTTLEthe ring clockwise.

8TurnJOGthedial to set the desired alarm recording duration (20S, 40S, 1M, 2M, 3M, 4M, 5M, or CC), then turn theSHUTTLE ring clockwise.

20S-5M. . Recording only for the displayed duration

CC. . . . . Recording as long as the alarm signal is being input (minimum 5 seconds)

9PressMENUtheEXIT button.

NOTES:

3TurnJOGthedial until the“MODE” setting is highlighted, then turn the SHUTTLE ring clockwise.

4TurnJOGthedial to set the desired alarm recording mode, then turn theSHUTTLE ring clockwise.

Y1. . . . . . Alarm recording is done when there is an alarm trigger.

Y2. . . . . . Alarm recording is done only when there is an alarm trigger during duration of programmed timer recording.

Y3. . . . . . Alarm recording is done only if there is an alarm trigger and the VCR is not in programmed timer recording mode.

Y4. . . . . . Alarm recording is done only when there is an alarm trigger during programmed timer recording duration. VCR comes on records only for alarm duration. Timer recording is not possible.

N. . . . . . . Alarm recording is not performed even if there is an alarm trigger.

5 TurnSHUTTLEthe ring clockwise.

œDuring alarm recording all but

œIf“OFF” appears on the digital display, alarm recording is not possible in order to prevent the recorded tape to be recorded over. To cancel the “OFF” display, press the STOP, EJECT or PLAY button or turn theSHUTTLE ring.

œIf an alarm trigger is receiv in progress, recording durati will be calculated from that p will register the alarm, but i an alarm scan and alarm search

œIf there is a power failure d the power is restored within duration, alarm recording will

œIf the alarm recording durati may not be found during an ala search. If the alarms are goi alarm scan or alarm search, th 20-second or more recording du

œTo do alarm recording during s

“MODE” to “Y1” or “Y3”. Alarm recording will be conducted only if the VCR is recording.

œIf the recording“000”,speedthe recordingmode i will be in 8-hour mode irrespective of the alarm

recording speed mode setting.

English