ALARM RECORDING
Alarm Recording Reset Function | Checking the Alarm Recordings Time |
To stop the recording of an alarm, close the connection between theALARM RESET IN terminal and theCOM terminal during alarm recording.
Alarm Recording Counter Display
œ During alarm“A”recording,will be flashing on the
1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“9.OTHERS” line, then turn the SHUTTLE ring clockwise.
øThe (OTHERS) menu appears.
digital display. | <OTHERS> | |
*ALARM@LOG | ||
| *POWER@FAILURE/DEW | |
œ If a superimpose display is being displayed and | ||
| *TERMINAL@SET@@@@SET1 | |
“ALARM COUNT” has been set to “Y” in the |
| |
(DISPLAY/SW OUT SET) menu, the number of alarm |
| |
recordings will flash on the monitor screen. |
| |
œ The maximum display number of alarm recordings is | ||
“999”. At the next alarm recording the counter will | 4 TurnJOGthedial to select the“ALARM LOG” line, | |
then turn the SHUTTLE ring clockwise. | ||
indicate “000”. | ||
| ||
| ø The (ALARM LOG) menu appears. | |
œ When the (ALARM LOG) menu appears, press the | ||
MENU RESET button to reset the alarm counter to | ø The number of alarm recordings, and the 10 | |
“000” (all the data of the (ALARM LOG) menu is reset). | most recent alarm recording times are | |
| displayed. | |
Connections to the ALARM IN Terminal | Example | |
œ Alarm input signal | <ALARM@LOG>@@@@@@@@@010 | |
|
| ||
Connect a | ||
| ||
theALARM IN and COM terminals. | ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| œ Continue turningJOG dial to displaythethe next | |
| (or previous) 10 alarm recording entries. When | |
| the number of alarm recording entries reaches | |
| 100, the older ones are erased as new ones are | |
| memorized. | |
| 5 PressMENUtheEXIT button. | |
| NOTE: | |
| œ If MENUtheRESET button is pressed while the | |
| (ALARM LOG) menu is displayed, the displayed data | |
| is erased.“AL” will be erased from the digital display. |
English | 25 |