SETTING THE CASSETTE EJECT MODE
Cassette Eject Setup
When using two or more VCRs, the cassette tapes of all the VCRs or some of the VCRs can be ejected at the same time.
NOTE:
œ“TERMINAL SET” in the (OTHERS) menu should always be set to “SET2”.
1 PressSTANDBY/ONthe button.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“4.WARNING OUT/CONTR. SET” line, then turn the SHUTTLE ring clockwise.
øThe (WARNING OUT/CONTROL SET) menu appears.
<WARNING@OUT@SET>SET@UP
ALARM@@@@@@@@@@@@Y
NON@REC@@@@@@@@@@N
MECHA.PROBLEM@@@@Y
<CONTROL@SET>
EJECT@MODE@@@@@@@EJECT1
OPERATION@@@@@@@@SLAVE
4TurnJOGthedial until the“EJECT MODE” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to select the desired cassette eject mode, then turn theSHUTTLE ring clockwise.
EJECT1 . . . . The cassette is ejected only if the VCR is not in recording or recording pause mode.
EJECT2 . . . . The cassette is ejected only if the VCR is in stop mode.6TurnJOGthedial until the“OPERATION” setting is highlighted, then turn the SHUTTLE ring clockwise.
7TurnJOGthedial to select the desired operation, then turn theSHUTTLE ring clockwise.
SLAVE . . . . . The function is restricted to only the VCR being operated.MASTER . . . The function is applied to the VCR being operated and all VCRs that are connected after it.
8PressMENUtheEXIT button.
Connection
VCR No. 1 | VCR No. 2 |
SERIES IN COM TIMER OUT | SERIES IN COM TIMER OUT |
| To SERIES IN termi |
| To COM terminal |
œDepending“EJECTon MODE”the setting in the (WARNING OUT/CONTROL SET) menu (see “Cassette Eject Setup”), the cassette loaded into the VCR can be ejected when there is input to this terminal.
Eject output (TIMER OUT) terminalœA signal is output fromEJECTthis button is pressed (if the VCR is set up as the
“MASTER” VCR; see step 7 under“Cassette Eject Setup”) or when there is input (a trigger) at the
SERIES IN terminal, even if the security lock is set or a cassette is not loaded.
NOTES:
œThe terminal names and signals usual setting.
œNames in brackets apply to te panel.
NOTE:
œTheEJECT button will not be operative during recording mode.40 | English |