Moisture Condensation Problems
Cause:When the VCR is first installed, moved from a cold areato a warm area or placed in a location with high humidity,œ Shield it from direct sunlight and keep it away from sources of intense heat. dew (moisture) may form in the unit. The Dew indicator
(À) blinks. If you operate the
œAvoid dusty or humid places.damage may result.
œAvoid places with insufficient ventilation for proper heat dissipation. Do not blockPrevention:the ventilation holes of the VCR. Do not place the unit1 Doonnota carpetoperatebecausethe VCR for
this will block the ventilation holes.
When the VCR reaches room te
œ Install the VCR in a horizontal position only. indicatorÀ) will( turn off and the
œAvoid locations subject to strongfor operationvibrations. .
œAvoid moving the VCR between cold and hot
locations“Moisture(seeCondensation Problems”, this Power
page).
œDo may
not place the VCR directly on top of the TV, as this
STANDBY/ON button.cause playback or recording problems.
VCR displayAvoiding Electrical Shock and Fire
Power on mode |
œ Do not handle the power cord with wet hands.
œ Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it bythe plug.
œIf any liquid is spilled on
œDo not place anything directlyelectricalonvoltagetopinsideofthe VCRthisas longVCRas it .is connected to a wall socket.
Disconnect the power cord from the wall socket if the
VCR is not to be used for a long time.
2 | English |