Sanyo SRT-8040P DAY/TIME SEARCH, TAPE COUNTER, Day/Time SearchNOTES:, mode, ring, SHIFT, SHIFT, SHUTTLE, SHUTTLE, SHUTTLE, be played back, COUNTER MEMORY, 7 PressPLAYthebutton

6 TurnSHUTTLEthe ring clockwise (or counterclockwise).

DAY/TIME SEARCH

Day/Time SearchNOTES:

This searches for a specified day/time for still images to œ If the end of the tape is rea
be played back.	tape will rewind and stop. If
1 PressSTANDBY/ONthe button.	is reached, it will stop.
	œ The alarm and day/time data ar
2 PressSEARCHthebutton three times during stop
	in a similar format. If they o
mode.	have the priority. Therefore,

ø“T/D SEARCH 01 00:00” will be displayed onday/time when an alarm recordi

screen.		day/time search will not stop
3 PressREC/PLAYthe SPEED l	(orj) button	such a case, use alarm scan t
		to set
		recording location.
the desired day,SHIFTthen« buttonpress.the
4 PressREC/PLAYthe SPEED l	(orj) button	œ The day/time search function
		to set
		correctly if searching for a
the desired hour,SHIFTthen« buttonpress. the
5 PressREC/PLAYthe SPEED l		the clock on the recording VC
	(orj) button	to set
the desired minutes.		using the CLOCK ADJUSTMENT fu
		œ If the recording has been mad
NOTES:
		the“TAPE” in (GENERAL SET) menu is set to

œThe setting can be made in “E10-180”,minutes240-hour) or more mode, the day/time

increments only.	search with a minutes setting (step 5) will not
	operate. When using the day
œ For recordings made on other VCRs, the exact
	such a recording,5)set“00”o. the m
time may not be found even if the minutes are
	œ If a recording on a tape exte
entered. For tapes recorded on older models of
	period, the same day may be p
VCRs produced by this company (the ones
	tape. If such a day is search
without a minutes setting for the day/time search
	month search setting, the des
function), make sure“00”to. set the minutes to
	found.

øThe desired day/time is searched and a still image of the recording will appear on-screen.

œThis function does not operat display appears on the digita

7 PressPLAYthebutton.

ø Playback will start.

TAPE COUNTER

Using the counter, it is easy to find a desired recording. NOTES:

1 PressCOUNTERthe RESET button, at the	œ There is no tape counter indi
beginning of the desired recording.	portions of the tape.
ø The counter will be reset to “0H 00M 00S”.	œ In the 8-hour recording speed
2 PressCOUNTERthe MEMORY button.	counter indicates real hours,
ø “[” appears on the digital display.	œ In the other recording speed
	indication is a ratio of the
ø To cancel the counter memory function, press
	indication. (In 64-hour“second”recor
the COUNTER MEMORY button a second time.
	of the tape counter actually represents approximately
3 After recording SHUTTLEor playback,ring 72/8 = 9turnreal secondsthe.)
counterclockwise from stop mode.	œ There may be a slight discrep
ø The tape is rewound to the counter “0H 00M	position shown on the tape co
00S” reading.	tape position.

øIf you rewind the tape past the “0H 00M 00S” position, turn the SHUTTLE ring clockwise.

œWhen rewinding the“0H 00Mtape00S” past position, a minus (– ) sign will be displayed.

English 37