AUTOREPEAT RECORDING

Autorepeat Recording

The same tape can be recorded over many times.œFollowBeforethestarting steps, under“NORMAL RECORDING”.

1PressMENUthebutton to display the MAIN MENU.

2TurnJOGthedial to select the“3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.

øThe (GENERAL SET) menu appears.

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@01:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

CLOG@DETECT.@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

VERTICAL@SYNC@@@@Y TAPE@@@@@@@@@@@@@T-160

3TurnJOGthedial until the“TAPE END MODE” setting is highlighted, then turn the SHUTTLE ring clockwise.

4TurnJOGthedial to set to“REPEAT1” or “REPEAT2” (Refer to “Setting the Mode at the End of the Tape.” on page 22), then turn the SHUTTLE ring clockwise.

5PressMENUtheEXIT button.

øThe REPEAT indicator lights.

NOTES:

œIf there is an alarm trigger recording,“A” is displayed on the digital display and

alarm recording will take place. (Refer to “ALARM RECORDING” on page 24.)

œIf “TAPEtheEND MODE” setting is “REPEAT1”, the REPEAT indicator will go off if there is an alarm trigger. After alarm recording, the recording will continue to the end of the tape then it will be rewound to the beginning and stop. “OFF” will be displayed on the digital display.

To turn off the “OFF” display, press the STOP, EJECT or PLAY button or turn theSHUTTLE ring.

œIf“AL” appears on the digital display and the “TAPE END MODE” setting is “REPEAT1”, autorepeat recording is not possible.

6 PressREC/PLAYthe SPEED l (orj) button to set the recording speed mode.

7PressRECthebutton.

øRecording starts. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.

øWhen the end of the tape is reached, “OFF” will be displayed and TAPE END OUT terminal output will 0 V, until the rewinding operation starts.

English

23