Sanyo SRT-8960 SPECIFICATIONS, Video, Audio, Input, Common, 0 V (GND), Tape speed, Connectors, Video input, Series input, Timer output, DC 5 V, 5.7k, Normally 5 V)

SPECIFICATIONS

General Specifications

Video head system	Dual-azimuth 4-head rotating helical scanning system:
	Dual azimuth 2-head for record and standard playback
	Dual azimuth 4-head for forward picture search, reverse picture search
	and still mode
Audio recording	In 8-, 24- and 40-hour modes (when using T-160 tape)
	In 6-, 18- and 30-hour modes (when using T-120 tape)
Tape speed	11.12 mm /sec (8-hour mode)
Specified video cassette tape	VHS 1/2 inch video cassette tape

Recording/playback timeSRT( -8960 only) 8, 24, 40, 64, 96, 128, 160, 224, 320, 480, 640, 960 and 1280 hours (when using T-160 tape)

6, 18, 30, 48, 72, 96, 120, 168, 240, 360, 480, 720 and 960 hours (when using T-120 tape)

Recording/playback timeSRT( -8168 only) 8, 24, 40, 64, 96, 128, 160 and 224 hours (when using T-160 tape) 6, 18, 30, 48, 72, 96, 120 and 168 hours (when using T-120 tape)

Recording/playback timeSRT( -8040 only) 8, 24 and 40 hours (when using T-160 tape) 6, 18 and 30 hours (when using T-120 tape)

Fast forward/rewind time	approximately 2 minutes 35 seconds (when using T-160 tape)
	approximately 2 minutes (when using T-120 tape)
Television system	NTSC color TV system

Video

Recording method	Luminance signal: FM recording
	Chrominance signal: Down-converted direct recording
Video input	1 V(p-p), BNC, 75Ω, υνβαλανχεδ
ςιδεο ουτπυτ	1 ς(π−π), ΒΝΧ, 75Ω, υνβαλανχεδ
Ηοριζονταλ ρεσολυτιον	Βλαχκ & ωηιτε ∝οδε	350 λινε ορ ∝ορε
	Χολορ ∝οδε	300 λινε ορ ∝ορε

Audio

Input	–8 dBs, RCA pin jack, 27 kΩ, υνβαλανχεδ
Ουτπυτ	–8 dBs, RCA pin jack, 600 Ω, υνβαλανχεδ

Connectors

Alarm (1 shot) input	No voltage, make-contact switch input (Low input 100ms or more,
	Normally 5 V)
Control input	Key code (pulse signal) (Normally 5 V)
Series input	No voltage, make-contact switch input (Low input 1s or more, Normally 5 V)
Ext timer (alarm reset) input	No voltage, make-contact switch input (Low input 100ms or more,
	Normally 5 V)
Common	0 V (GND)
Warning output	Open collector Max. 500 mA (Active Low 0 V, Normally open)
Control output	Key code (pulse signal) (Normally 5 V)
Tape end output	Open collector Max. 50 mA (Active Low 0 V, Normally open)
Timer output	DC 5 V, 5.7kΩ, (Λοω ουτπυτ)
Σωιτχη ουτπυτ	Πυλσε σιγναλ (Νορ∝αλλψ 5 ς)
Ρε∝οτε χοντρολ ινπυτ	3.5 ∝∝ ∝ινι ϕαχκ

English