OUTPUT TERMINALS
TAPE END OUT Terminal | NOTES: |
œIf “TAPE”the in the (GENERAL SET) menu is set
œDuring recording, when the end of the tape is reached or when the tape counter readingto
recording, the output becomes | 0 V (Low) for about 2 |
seconds only. | œ If “SERIESthe REC” is set to “Y” in the |
(ALARM/SERIES REC SET) menu, the output |
œTo reset the output,STOP or EJECTpressbutton. thebecomes 0 V (Low) for about 2 seconds when the counter reaches “8H 00M 00S”, even if the “TAPE
END OUT” is set to “END”.
1PressMENUthebutton to display the MAIN MENU.
2TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.
øThe (ALARM/SERIES REC SET) menu appears.
<ALARM/SERIES@REC@SET>
*ALARM@SET
@@MODE@@@@@@@@@@@Y1
@@SPEED@@@@@@@@@@8H
@@DURATION@@@@@@@20S
*1@SHOT@SET
@@FIELD@@@@@@@@@@1
@@INTERVAL@@@@@@@1M
*SERIES@REC@@@@@@N
*TAPE@END@OUT@@@@8:00
œIf “SERIESthe REC” is set to “Y” in the (ALARM/SERIES REC SET) menu, the output becomes 0 V (Low) until 5 minutes have passed after the tape reaches the end.
5PressMENUtheEXIT button.
COM Terminal
œCommon GND (ground) terminal w other terminals to external de
TIMER OUT terminal
œ During timer recording, the o
3TurnJOGthedial until the“TAPE END OUT” setting is highlighted, then turn the SHUTTLE ring clockwise.
4TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.
8:00 (6:00) . . The output becomes 0 V (Low) when the tape counter reaches“8H 00M 00S (or 6H 00M 00S)” and/or when the tape reaches the end.
END . . . . . . . The output becomes 0 V (Low) when the tape reaches the end.
œDuring timer recording
Timer recording
5V (H) (Output impedanceΩ)
0V (L)
Ενγλιση | 45 |