Sanyo SRT-8960 Setting the Tape Management Function, TAPE MANAGEMENT, Y, JOG, JOG, setting, dial until the, dial until the, When setting to, MENU EXIT button

TAPE MANAGEMENT

Setting the Tape Management Function

1PressMENUthebutton to display the MAIN MENU.

2TurnJOGthedial to select the“6.TAPE MANEGEMENT” line, then turn the SHUTTLE ring clockwise.

øThe (TAPE MANAGEMENT) menu appears.

<TAPE@MANAGEMENT>

*TAPE@MANAGEMENT@@@@N

*PROTECT@DAY@@@@@@@30

*REC@PASS@SET@@@@@@10

*GROUP@NO.SET@@@@@OFF

*OVERRIDE@@@@@@@@@@@N

7TurnJOGthedial until the“REC. PASS SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

8TurnJOGthedial to select the desired number of re-recording times, then turn theSHUTTLE ring clockwise.

OFF . . . . The number of re-recording times will not be checked.

1-100 . . . Maximum number of re-recording times. (Refer to“Concerning the Number of Times Tapes can be Rerecorded on” on page 20.)

3 TurnSHUTTLEthe ring clockwise.

4TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

N. . . . . . . The tape management function is not active.Y. . . . . . . The tape management function is active.

When setting to“Y”, please continue with the settings below.

5TurnJOGthedial until the“PROTECT DAY” setting

is highlighted, then turn the SHUTTLE ring clockwise.

6TurnJOGthedial to select the desired number of days to protect the tape, then turn theSHUTTLE ring clockwise.

OFF . . . . The tape is not protected

1-255 . . . Number of days to protect the tape (prevent over-recording), from the date of the last recording on the tape (or the last expected recording date (calculated using the tape length (T-120 or T-160) and the recording speed)).

NOTES:

œSince data is read before i number of times will be incr recording is stopped before

œDuring autorepeat recording times count will be updated rewound to the beginning. Au will proceed even if“RECthe cou

PASS SET” setting.

9TurnJOGthedial until the“GROUP NO. SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

FTurnJOGthedial to select the desired group number, then turn theSHUTTLE ring clockwise.

OFF . . . . The group number will not be checked.1-15 . . . . Group number setting.

GTurnJOGthedial until the“OVERRIDE” setting is highlighted, then turn the SHUTTLE ring clockwise.

HTurnJOGthedial to select the desired override mode, then turn theSHUTTLE ring clockwise. (Refer to “Tape Management Conflict Display” on the next page.)

NOTE:	N. . . . . . .	Only EJECT button operation is
		accepted after a conflict has occurred.
œ Since the last expected recording date is a
	Y. . . . . . .	The next operation is accepted after a
calculated date (using the tape length (T-120 or
		conflict has occurred. This will override
T-160) and the recording speed), it may be
		setting.
different from the actual last recording date, due
to other settings such as alarmPressrecordings,the
I	MENU EXIT button.

program timer recordings and holiday settings.

NOTES:

œOnce the tape management data is recorded on tape, it cannot be changed.

œThe criteria (condition) for based on the data recorded on settings in the (TAPE MANAGEM

English 17