RECORDING USING AN EXTERNAL TIMER INPUT

Recording can be controlled by an external start/stop signal input at theEXT TIMER IN terminal.

While there is input at theEXT TIMER IN terminal, the external input indicator“E” will light on the digital display and the input will be recorded. Recording will stop when there are no more input signals.

Example 3: To record using the signal input at the EXT TIMER IN terminal, in 24-hour mode.

œFollowBeforethestarting steps, under“NORMAL RECORDING”.

NOTE:

œExternal timer input recording can only be set on the

“EXT” line of the (TIMER SET) menu.

1Follow1 stepsand2under“PROGRAM TIMER RECORDING” on page 27.

2TurnJOGthedial until the“EXT” line is highlighted, then turn the SHUTTLE ring clockwise.

3TurnJOGthedial to select the recording speed mode (ex: 24), then turn theSHUTTLE ring clockwise.

4TurnJOGthedial to select“Y”.

<TIMER@SET>

WEEK@@START@@STOP@@SPD

SUN@@@--:--@--:--@@---

@N

MON@@@--:--@--:--@@---

@N

TUE@@@--:--@--:--@@---

@N

WED@@@--:--@--:--@@---

@N

THU@@@--:--@--:--@@---

@N

FRI@@@--:--@--:--@@---

@N

SAT@@@--:--@--:--@@---

@N

DAILY@--:--@--:--@@---

@N

EXT@@@*****@*****@@@24@Y

5PressMENUtheEXIT button.

6PressTIMERthebutton.

NOTES:

œAlarm recording is not possible using this function.

œAlarm recording reset function is not possible using this function.

œOther timer recordings using the standard procedure can also be programmed.

English

31