NOTE:
œ This function does not operate display appears on the digita

NORMAL PLAYBACK

Normal PlaybackTracking Control

1 Turn on the power to the IfVCRthereand TVis noisemonitorin.the image

 

1 While looking at the playb

2 Load the video cassette tape.

3 PressREC/PLAYthe

TRACKING+button repeatedly to

lSPEED(orj) button tonoise.

select the playback speed mode.

ø The selected playback speed mode is

2 If it cannot be TRACKINGminimized,–

button repeatedly.

displayed on the digital display.

NOTE:

NOTES:

œ This function does not operate

 

œA slow motion effect or accelerateddisplay appearslaybackon the digita effect can be achieved by using a slower or faster

playback speed than the speed used for recording.

Vertical Lock Control

œ If the playback speed“000”, mode is set to

 

During still image mode,

playback (step 4) will not be possible.

4 PressPLAYthebutton.

1 PressV.theLOCK+button repeatedly

vertical rolling of the im

ø Playback starts.

2 If it cannot beV.corrected,LOCK– button

ø If necessary, adjust the tracking to eliminate the

repeatedly.

noise from the picture.

NOTE:

ø If the image is unstable (rolling vertically),

œ This function does not operate

adjust the vertical lock control to correct.

display appears on the digita

 

5 To stop playback,STOPbuttonpress. the

øTo advance (or rewind) the tape, turn the SHUTTLE ring clockwise (or counterclockwise).

NOTES:

Sharpness Control

1 During playback,SHARPNESSpress and button for 3 seconds or mo

ø“SH@-:-”appears on the digital display.

œA tape recorded on a real time video cassette

recorder produced by another2 manufacPressSOFTtheurer(oSHARP)maybutnoton for t play back with the same degreesharpnessof clarityofonthethisimageunit..

œWhen used with a multiplexer3inWhen24-finished,or 40-SHARPNESShourpressmodebuttheon.

playback (or“TAPE”whenin (GENERALtheSET) menu is set to “T-120”, in 18- or 30-hour mode playback), the image may roll vertically. In such a case, set “VERTICAL SYNC” to “N” in menu (GENERAL SET) menu.

œ When a tape recorded with aAudiotime lapsePlaybackVCR is

played back, the playback speed mode display and

 

œ Audio playback is only possibl

playback time may be different due to the recording

speed mode.

40-hour modes “TAPE”(or inwhen(GENERALthe

SET) menu is set to “T-120”, in 6-hour, 18-hour and

 

 

30-hour modes).

 

œ The playback speed has to be

 

recording speed, for normal pl

34

English