SINGLE IMAGE RECORDING

The single image recording function of this VCR can be used to create image data files or animations.

NOTES:

œThe trigger1 SHOTatIN terminaltheshould be on for 0.1 sec. or more.

Single Image Recording Setup

œ The trigger 1intervalSHOT IN terminalatvariesthe

1 In stop mode,REC/PLAYpressSPEED lthe(or

according to the number of images to record, but

j) button, to set the“000”.recordingshouldspeedbe over 1 tosec.

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.

øThe (ALARM/SERIES REC SET) menu appears.

<ALARM/SERIES@REC@SET>

*ALARM@SET

@@MODE@@@@@@@@@@@Y1

@@SPEED@@@@@@@@@@8H

@@DURATION@@@@@@@20S

*1@SHOT@SET

@@FIELD@@@@@@@@@@1

@@INTERVAL@@@@@@@1M

*SERIES@REC@@@@@@N

*TAPE@END@OUT@@@@8:00

4TurnJOGthedial until the“FIELD” setting is highlighted, then turn the SHUTTLE ring clockwise.

5TurnJOGthedial to set the number of fields (images) to record every time(1, 2, 3, 4, 5, 10, 30, 60), then turn theSHUTTLE ring clockwise.

œAlarm recording is not possibl recording.

œDuring“INTERVAL”the period set for single image recording, the WARNING OUT terminal will not be 0 V even if the“NON REC” on the (WARNING OUT/CONTROL SET) menu is set to “Y”.

œIf a single image recording tr theREC button is not pressed) during the duration set for“INTERVAL”, single image recording will be

conducted automatically after the set duration.

œIf a single image recording tr

REC button is pressed) during the duration set for “INTERVAL”, single image recording will be conducted immediately.

œWhen using1 SHOTtheIN terminal, connect a make-contact switch (no voltage) between the1 SHOT IN and COM terminals.

6 TurnSHUTTLEthe ring clockwise.

7TurnJOGthedial to set the interval between each image recording (1M, 2M, 3M), then turn the SHUTTLE ring clockwise.

8PressMENUtheEXIT button.

9PressRECthebutton.

øThe single image recording mode will be activated (the VCR will be in recording stand-by mode).

Recording of set number of images

 

 

 

 

 

 

 

 

 

Input of single

 

 

 

 

Input of single image

image recording

 

 

 

 

recording trigger

trigger

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FPressRECthebutton one more time, or send a trigger through the1 SHOT IN terminal on the back panel, to start the single image recording.

“INTERVAL” setting (1, 2 or 3 minutes)

NOTE:

œIf a setting“1” is selectedotherfor “FIELD”thanat

step 5, recording will be done in 120-hour mode. The recording speed cannot be modified.

G When finished,STOP buttonpress. the

English

33