mode.
ø “T/D SEARCH 01 00:00” will be displayed on screen.
DAY/TIME SEARCH
Day/Time Search
This searches for a specified day/time for still images to be played back.

NOTES:

œ If the end of the tape is rea tape will rewind and stop. If

1 PressSEARCHthebutton three times during stop

is reached, it will stop.

œ The alarm and day/time data ar in a similar format. If they o have the priority. Therefore,

day/time when an alarm recordi

2 PressREC/PLAYthe SPEED l (orj) button today/timeset search will not stop the desired day,SHIFTthen« buttonpress.thesuch a case, use alarm scan t

3 PressREC/PLAYthe SPEED l (orj) button

recording location.

to set

the desired hour,SHIFTthen« buttonpress.œ Tthe day/time search function

4 PressREC/PLAYthe SPEED l (orj) button

correctly if searching for a

to set

the desired minutes.

the clock on the recording VC

using the CLOCK ADJUSTMENT fu

 

NOTES:

œ If the recording has been mad

 

œ The setting can be made in 10

increments only.

the“TAPE”minutes(GENERAL SET) menu is set to

“T-120”, in 240-hour) or more mode, the day/time

œFor recordings made on othersearchVCRs,with a minutesthesettingexact(see step 4 above) w time may not be found even ifnottheoperateminutes. Whenare using the entered. For tapes recordedononsucholdera modelsrecording,of 4set th VCRs produced by this companyabove)(the“00”. toones

without a minutes setting for the day/time

 

œ If a recording onsearchtape exte

function), make sure“00”to. set the minutes to

 

period, the same day may be p

5 TurnSHUTTLEthe ring clockwise (or

tape. If such a day is search

counterclockwise).

month search setting, the des

ø The desired day/time is searched and a still

found.

œ This function does not operat

image of the recording will appear on-screen.

6 PressPLAYthebutton.

display appears on the digita

 

ø Playback will start.

 

TAPE COUNTER

Using the counter, it is easy to find a desired recording. NOTES:
1 PressCOUNTERthe RESET button, at the

œ There is no tape counter indi

beginning of the desired recording.

portions of the tape.

ø The counter will be reset to “0H 00M 00S”.

œ In the 8-hour recording speed

2 PressCOUNTERthe MEMORY button.

counter indicates real hours,

ø [appears on the digital display.

œ In the other recording speed

indication is a ratio of the

ø To cancel the counter memory function, press

indication. (In 64-hour“second”recor

the COUNTER MEMORY button a second time.

of the tape counter actually represents approximately

 

3 After recording SHUTTLEor playback,ring 72/8 = 9turnreal secondsthe.)

counterclockwise from stop mode.

œ There may be a slight discrep

ø The tape is rewound to the counter “0H 00M

position shown on the tape co

00S” reading.

tape position.

øIf you rewind the tape past the “0H 00M 00S” position, turn the SHUTTLE ring clockwise.

œWhen rewinding the“0H 00Mtape00S” past position, a minus (–) sign will be displayed.

English

37