Function Descriptions
[8] Aperture
Emphasizes contours and increases the vividness of the entire image.
[9] Motion Detection
The screen is divided into 48 areas (8 x 6) and movement is detected from changes in brightness of representative points within each area.
The detection status can be confirmed by enquiring using the Status command.
In addition, the detection sensitivity can be adjusted by configuring the following items.
⁃⁃ Sensitivity (MOVE)
Sensitivity when determining movement can be configured to a range of 1 to 10. 1 is the most sensitive to movement.
⁃⁃ Brightness Level (Y-LEVEL)
Settings for minimum brightness level when determining movement (Valid for brightness above the configured level)
The configuration range is 1 to 10. 1 is the most sensitive to the minimum brightness level.
⁃⁃ Brightness Difference (Y-Differ)
Settings for differences in brightness of the 2 images when determining movement (Invalid when exceeding configured brightness differences)
The configuration range is 1 to 10. 1 is the most sensitive to the difference in maximum brightness.
⁃⁃ Time Interval (Duration)
Time interval settings when determining movement The configuration range is 1 to 60. 1 is the most sensitive to minimum time intervals.
⁃⁃ Time intervals are divided into 5 fields.
Movement Assessment Confirmation Mode (TEST)
[10] Day/Night Switch Control
⁃⁃ AUTO
Automatically switches the camera from color images to black and white images depending on the brightness of the day and night. The illumination level at which the camera changes from color images to black and white images can be set to
3 levels (MID, HIGH, LOW) or to manual (ADJ) setting.
⁃⁃ COLOR
Fixes the camera to color images.
⁃⁃ B/W
Fixes the camera to black and white images.
− 31 −
