Operation 26
Camera operations
Auxiliary function operation
Transmits AUX ON/OFF commands to the
selected cameras.
For details, refer to “List of auxiliary
commands for Sanyo cameras”. (P30)
1Press the AUX button.
“AUX ON” will be displayed.
If the AUX button is pressed once more, the
display changes to “AUX OFF”.
AUX ON :–
1-16 ENT/ESC
2Press a numeric button (Example: 2)
and then press the ENT button.
AUX ON :2–
CAM:001
AUX ON :2
1-16 ENT/ESC
Available settings:
Sanyo SSP/HSSP: 1−16
Pelco-D: 1−8
Preset position retrieval operation
This retrieves preset positions which have
been recorded by the camera beforehand.
Up to 255 settings can be retrieved. (Varies
depending on model.)
1Press the PRESET GO button.
“GO PRESET P” will be displayed.
GO PRESET P:–
1-255 ENT/ESC
2Press a numeric button (Example: 1)
and then press the ENT button.
The camera will move to preset position 1.
GO PRESET P:1
CAM:001
■
■
Preset memory operations
Records preset positions into the cameras.
First use the joystick or some other method
to select a preset position for the camera.
1Press the PRESET MEMORY button.
You will be prompted for the password.
MEM.PRESET:?
PASSWORD[ ---- ]
2No password is set initially, so simply
press the ENT button.
MEM.PRESET:–
1-255 ENT/ESC
3Press a numeric button (Example: 1)
to select the desired preset number,
and then press the ENT button.
Preset position 1 has now been recorded.
MEM.PRESET:1
CAM:001
If you make a mistake with a number
while entering any of the settings,
press the CLR button.
To return to another operation, press
the ESC/PWR button to return to the
initial screen.
•
•
■