Part names
Front
① ② | ③ |
⑩
PWR Tx Rx
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
④ ⑤ ⑥⑦ ⑧ | ⑨ | ||||||||
DVR: Digital video recorder
①Escape/Power button (ESC/PWR)
ESC:
This is used to exit from the current operating menu and return to the initial screen.
PWR:
• When you press the button, the power turns on and the PWR indicator on the power/ communication indicator panel illuminates. The version information will be displayed in the menu display, and then the initial screen will be displayed.
(Version information)
SANYO
Ver:X.XX
③Menu display
This displays the information which is required for menu settings.
④Clear button (CLR)
This button is used to correct any character input errors such as passwords.
⑤Numeric buttons (0 to 9)
These are used to select camera numbers and for character input.
⑥Enter button (ENT)
This is used to confirm menu settings.
⑦DVR operation button (P28)
▼
(Initial screen)
SANYO SSP 19.2k
CAM:001 D1 CH01
•If you press and hold the button for approximately 3 seconds, “POWER OFF” will be displayed. When you release the button, the power will turn off.
SANYO SSP 19.2k
<POWER OFF >
②Mouse button (
)
If the accessory USB cable is used to connect a DVR with a mouse function (sold separately) to the USB mouse port at the rear of the system controller, the joystick can be used to operate the cursor. (P29)
⑧Camera operation buttons
These are used to operate the cameras. (P20)
⑨Joystick
This controls the pan (left and right), tilt (forward and back) and zoom in and out (rotation) operations of the camera. In addition, it is used to select menu items which are appearing in the menu display.
⑩Power/communication indicator panel
• PWR (Power): Illuminates when the power is
turned on.
•Tx: Flashes while a command is being sent.
•Rx: Flashes while a command is being received.
Preparations | 8 |
