Camera operations (continued)
■Retrieving pan, sequence and tour operations recorded in a PTZ camera
You can select preset pan, sequence and tour operations so that these operations can be carried out.
This operation is limited to the following camera models which already contain preset operations.
•
If you enter a number outside the range of 1 to 4, “error” will be displayed, so
PAN PATTERN: error
A Pan operation
1While pressing the SHIFT/FUNC. button, press the PAN button.
“PAN PATTERN” will be displayed.
PAN PATTERN:
+ | – | |
|
2Press a numeric button (Example: 2) and then press the ENT button.
The pan operation recorded for the selected number will then be carried out.
Returns to the initial screen.
PAN PATTERN:2
CAM:002
▼
SANYO SSP 19.2k
CAM:001 D1 CH01
B Sequence operation
1While pressing the SHIFT/FUNC. button, press the SEQ button.
“SEQ PATTERN” will be displayed.
+ | SEQ | PATTERN: | |
| – | ||
ENT/ESC | |||
|
2Press a numeric button (Example: 2) and then press the ENT button.
The sequence operation recorded for the selected number will then be carried out. Returns to the initial screen.
SEQ PATTERN:2
CAM:002
C Tour operation
1While pressing the SHIFT/FUNC. button, press the TOUR button.
“TOUR PATTERN” will be displayed.
TOUR PATTERN:
+ | – | |
|
2Press a numeric button (Example: 2) and then press the ENT button.
The tour operation recorded for the selected number will then be carried out.
Returns to the initial screen.
TOUR PATTERN:2
CAM:002
