Removing Jammed Staples, 304 | Savin 25105 instruction

What to do if Something Goes Wrong

eRemoving Jammed Staples

Important

❒After removing jammed staples, always carry out step 10 and 11. If you do not do this, the stapler cartridge could be damaged.

Note

❒Staples might be jammed because of curled copies. In this case, try turning the copy paper over in the tray. If there is no improvement, change to copy paper with less curl.

❒After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.

		• 1: Open the front cover of the finisher.
	5	• 2: Pull lever R8 and fully pull out the
		staple unit.
		• 3: Turn knob R9 until the marks are
		• 3: Turn knob R9 until the marks are
		aligned.
		• 4: Turn knob R9 more and raise the sta-
		ple unit towards you.

• 5: Pull out the staple unit lever.

• 6: Pull out the staple unit gently.

304

Page 41

Image 41

Savin 25105 operating instructions Removing Jammed Staples, 304

Contents

Copy Reference 265 If Your Machine Does Not Operate as You WantGeneral 266 Document ServerTy ⇒ P.314 General Fea Tures 267 Connect CopyIng the Toner Bottle Ing Misfeeds Copy 268 Components Display269 Yet Copy settingsProgress 270 Server 271 272 If Connect Copy is Cleared 273 If You Cannot Exit Connect Copy 274 275 If You Cannot Make Clear Copies 276 If You Cannot Make Copies As You Want 277 Adjust ImageCombine Original Orientation Duplex278 Document Server Stamp279 Lete User Stamp See ⇒ P.320 Adjust Image When Memory is FullConnect Copy 280 281 Loading PaperTo load paper in tray 1 Tandem Tray 282 When the whole tray is pulled outWhen the left half of the tray is pulled out 283 Loading paper in Tray 2 or 284 Loading Paper in the Large Capacity Tray 285 Loading Paper in the Optional A3/11 × 17 Tray Kit 286 Changing the Toner Bottle 287 288 289 Clearing Misfeeds 290 291 292 293 294 295 Changing the paper size in Tray Changing the Paper SizeChanging the paper size in Tray 2 and Tray 296 297 298 299 300 301 Adding Staples 302 303 304 Removing Jammed Staples 305 306 307 Removing Punch Waste 308 309 Accessing User Tools Copier/Document Server Features 310 See ⇒ P.314 Settings You Can Change with the User Tools 311 Exiting User Tools 312 User Tools Menu Copier/Document Server Features 313 General Features Settings You Can Change with the User ToolsGeneral Features 314 315 316 Original Mode LevelSet Ratio 317 318 Display/Panel Tone 319 320 Default Image Back Of Cover 321 322 323 Default Left to Right 324 Background Numbering 325 Preset Stamp 326 User Stamp Default Auto Select Default 01/01/2000Date Stamp 327 Default Per Original Default Opposite PositionNumbering 328 Center 329 Default Original is Set Default 10 secondsInput/Output 330 331 Default Store And Print Default Time Sort DescendingDefault Do Not Delete Document Server 333 Key Operator Tools Press the Delete User Code key 334 335 Dos And Donts Machine Environment Where to Put Your MachineOptimum Environmental Conditions Environments To Avoid 337 Power ConnectionAccess to Machine Cleaning the Document Feeder Cleaning the Exposure GlassCleaning the machine Maintaining Your Machine 339 Stapling Position 340 Mainframe First copy time Non-reproduction areaCopying speed Reproduction ratio Power consumption Type 2 105copies/minute model Power consumption Type 1 85copies/minute modelDimensions W × D × H up to exposure glass Maximum number of continuous copy sets 344 WeightNoise Emission *1 Type Power Source Original weightDocument Feeder Mode Finisher Storage Number of files CD-R/RW OptionMaximum number of writes/deletes 347 348 A3/11 × 17 Tray Kit Option 349 Punch Kit Option Large Capacity Tray LCT Option Dimensions W × D × H, option unitPaper capacity 350 Continuous copying speed Copy Connector Cable OptionLength 351 352 Index Background Numbering 353 354