Power Connection, Access to Machine, 337 | Savin 25105 guide

Where to Put Your Machine

Power Connection

RWARNING:

•Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extention cord.

•Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire.

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

RCAUTION:

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•When the main switch is in the Stand-by position, the optional anti-conden- sation heaters are on. In case of emergency, unplug the machine's power cord.

•When you unplug the power cord, the anti-condensation heaters turn off.

• Make sure the plug is firmly inserted in the outlet.	7

• Voltage must not fluctuate more than 10 %.

Access to Machine

Place the machine near the power source, providing clearance as shown.

1. Rear: more than 20cm (7.8")	3.
2. Right: more than 3cm (1.1")	4.

Note

Front: more than 55.5cm (21.6")

Left: more than 40cm (15.7")

❒For the required space when options are installed, please contact your service

representative.

337

Image 74

Savin 25105 operating instructions Power Connection, Access to Machine, 337

Contents

Copy Reference 265 If Your Machine Does Not Operate as You WantGeneral Ty ⇒ P.314 General Fea Document Server266 Tures Ing the Toner Bottle Connect Copy267 Ing Misfeeds 268 Copy Components Display269 Progress Copy settingsYet 270 271 Server If Connect Copy is Cleared 272 If You Cannot Exit Connect Copy 273 274 If You Cannot Make Clear Copies 275 If You Cannot Make Copies As You Want 276 277 Adjust ImageCombine Original Orientation Duplex278 279 StampDocument Server Lete User Stamp Connect Copy When Memory is FullSee ⇒ P.320 Adjust Image 280 281 Loading PaperTo load paper in tray 1 Tandem Tray 282 When the whole tray is pulled outWhen the left half of the tray is pulled out Loading paper in Tray 2 or 283 Loading Paper in the Large Capacity Tray 284 Loading Paper in the Optional A3/11 × 17 Tray Kit 285 Changing the Toner Bottle 286 287 288 Clearing Misfeeds 289 290 291 292 293 294 295 Changing the paper size in Tray 2 and Tray Changing the Paper SizeChanging the paper size in Tray 296 297 298 299 300 Adding Staples 301 302 303 Removing Jammed Staples 304 305 306 Removing Punch Waste 307 308 Accessing User Tools Copier/Document Server Features 309 See ⇒ P.314 Settings You Can Change with the User Tools 310 Exiting User Tools 311 User Tools Menu Copier/Document Server Features 312 313 General Features Settings You Can Change with the User ToolsGeneral Features 314 315 316 Original Mode LevelSet Ratio 317 Display/Panel Tone 318 319 Default Image Back Of Cover 320 321 322 Default Left to Right 323 Background Numbering 324 Preset Stamp 325 User Stamp 326 Date Stamp Default 01/01/2000Default Auto Select 327 Numbering Default Opposite PositionDefault Per Original 328 329 Center Input/Output Default 10 secondsDefault Original is Set 330 331 Default Do Not Delete Default Time Sort DescendingDefault Store And Print Document Server Key Operator Tools 333 334 Press the Delete User Code key Dos And Donts 335 Optimum Environmental Conditions Where to Put Your MachineMachine Environment Environments To Avoid 337 Power ConnectionAccess to Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Document Feeder Maintaining Your Machine Stapling Position 339 340 Mainframe Copying speed Non-reproduction areaFirst copy time Reproduction ratio Dimensions W × D × H up to exposure glass Power consumption Type 1 85copies/minute modelPower consumption Type 2 105copies/minute model Maximum number of continuous copy sets 344 WeightNoise Emission *1 Type Document Feeder Original weightPower Source Mode Finisher Maximum number of writes/deletes CD-R/RW OptionStorage Number of files 347 A3/11 × 17 Tray Kit Option 348 Punch Kit Option 349 Paper capacity Dimensions W × D × H, option unitLarge Capacity Tray LCT Option 350 Length Copy Connector Cable OptionContinuous copying speed 351 Index 352 353 Background Numbering 354