Clearing Misfeeds, 289 | Savin 25105 instruction

x Clearing Misfeeds

xClearing Misfeeds

RCAUTION:

•The fusing section of this equipment might be very hot. You should be very careful that you don't touch this section when removing the misfed paper.

Important

❒When clearing misfeeds, do not turn off the operation switch or your copy settings will be cleared.

❒To prevent misfeeds, do not leave any torn scraps of paper within the ma- chine.

❒If paper misfeeds occur repeatedly, contact your service representative.

5

Note

❒More than one misfeed area may be indicated. In this case, check every appli- cable area. Refer to the following charts: A, B, C, D, U, P, R (R1 – R6), Z

❒You can find a sticker explaining how to remove misfeed paper inside of the front cover or inside of the finisher.

289

Image 26

Savin 25105 operating instructions Clearing Misfeeds, 289

Contents

Copy Reference 265 If Your Machine Does Not Operate as You WantGeneral Ty ⇒ P.314 General Fea Document Server266 Tures Ing the Toner Bottle Connect Copy267 Ing Misfeeds 268 Copy Components Display269 Progress Copy settingsYet 270 271 Server If Connect Copy is Cleared 272 If You Cannot Exit Connect Copy 273 274 If You Cannot Make Clear Copies 275 If You Cannot Make Copies As You Want 276 277 Adjust ImageCombine Original Orientation Duplex278 279 StampDocument Server Lete User Stamp Connect Copy When Memory is FullSee ⇒ P.320 Adjust Image 280 281 Loading PaperTo load paper in tray 1 Tandem Tray 282 When the whole tray is pulled outWhen the left half of the tray is pulled out Loading paper in Tray 2 or 283 Loading Paper in the Large Capacity Tray 284 Loading Paper in the Optional A3/11 × 17 Tray Kit 285 Changing the Toner Bottle 286 287 288 Clearing Misfeeds 289 290 291 292 293 294 295 Changing the paper size in Tray 2 and Tray Changing the Paper SizeChanging the paper size in Tray 296 297 298 299 300 Adding Staples 301 302 303 Removing Jammed Staples 304 305 306 Removing Punch Waste 307 308 Accessing User Tools Copier/Document Server Features 309 See ⇒ P.314 Settings You Can Change with the User Tools 310 Exiting User Tools 311 User Tools Menu Copier/Document Server Features 312 313 General Features Settings You Can Change with the User ToolsGeneral Features 314 315 316 Original Mode LevelSet Ratio 317 Display/Panel Tone 318 319 Default Image Back Of Cover 320 321 322 Default Left to Right 323 Background Numbering 324 Preset Stamp 325 User Stamp 326 Date Stamp Default 01/01/2000Default Auto Select 327 Numbering Default Opposite PositionDefault Per Original 328 329 Center Input/Output Default 10 secondsDefault Original is Set 330 331 Default Do Not Delete Default Time Sort DescendingDefault Store And Print Document Server Key Operator Tools 333 334 Press the Delete User Code key Dos And Donts 335 Optimum Environmental Conditions Where to Put Your MachineMachine Environment Environments To Avoid 337 Power ConnectionAccess to Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Document Feeder Maintaining Your Machine Stapling Position 339 340 Mainframe Copying speed Non-reproduction areaFirst copy time Reproduction ratio Dimensions W × D × H up to exposure glass Power consumption Type 1 85copies/minute modelPower consumption Type 2 105copies/minute model Maximum number of continuous copy sets 344 WeightNoise Emission *1 Type Document Feeder Original weightPower Source Mode Finisher Maximum number of writes/deletes CD-R/RW OptionStorage Number of files 347 A3/11 × 17 Tray Kit Option 348 Punch Kit Option 349 Paper capacity Dimensions W × D × H, option unitLarge Capacity Tray LCT Option 350 Length Copy Connector Cable OptionContinuous copying speed 351 Index 352 353 Background Numbering 354