![](/images/backgrounds/151600/bg7.png)
What to do if Something Goes Wrong
2705
The [
Connect
] key does not
appear on the display. The master unit is in Preset
Jobs mode. Exit Preset Jobs mode in
one of the following ways.
❖
If you are still selecting copy settings and copying has not started yet :Press the [
Clear
] key
then remove the origi-
nals set in the master
unit document feeder.
❖
If Preset Jobs mode is in progress :Press the {
Stop
} key,
follow the instructions
on the display then
press the [
Cancel
] key.
Reference
See “Preset Jobs” ⇒
P.60 “Job Preset”
The [
Connect
] key does not
appear on the display. The “Connect Copy” of
User Tools setting is set to
“No”.
Change the setting to
“Yes” or press the [
Con-
nect
] key on the other unit.
Reference
See “Connect Copy” ⇒
P.269 “Connect Copy”
The Connect Copy cable is
damaged. Please contact your service
representative.
L indicator is lit. Follow the instructions
shown on the display.
Machine Status Cause Action