Installing the Bridge Hardware
16
2.4Mounting theBridgeHardware
Replacethe bridge enclosurecover.Donotapplypowertothe bridge yet.
The bridge is supplied withtwomounting brackets. Install themon the bridge’s
side orbottompanelas showninFigure 5,using the screwsprovided.
If you useyourown hardware,use 6--32machine screwsand do notallowany
screwto protrude morethan 1/4in(6mm)intothe bridge.
Securethe bridge toaverticalpanelorhorizontalshelfwithscrewsthrough the
mounting bracketholes.
Mounting Requirements
Provide adequateservice access tothe rearpanelLEDsand cableconnectors.
Also notethe requirementsforventing clearancesas showninFigure 6.
Figure5 Mounting Dimensions
164mm
Side
Panel
Mounting
Bottom
Panel
Mounting
Donotallowscrewsto protrudemorethan1/4in(6mm)insideBridge.
243
mm
138mm
164mm