Schneider Electric 174 CEV

DiagnosticTools

6.5PING

PINGisa utilityprogramyou can usetocheck Ethernetconnectionsbetween the

bridge and otherIPaddresses.

6.5.1Starting PINGat theBridge

PINGcan be run fromthe bridge’scommand line.You can get the command line

promptbyinitializing the bridge withoutaconnection toaBOOTPserver.

Setup

If akeyboard and monitorare already connected tothe bridge,stop the bridge by

pressing Qand confirming thatyou want to quit the bridge application.

If akeyboard and monitorare notconnected,remove powertothe bridge and

connect themtothe bridge’sconnectorpanel.Restore powertothe bridge.

If the bridge displays itsCFGUTILmenu,press Escape toclosethe menu.This

should displaythe bridge’sC:\>prompt.

Starting

Tostartthe PINGprogram,enter:PING<NOE_ip_address>

Youshouldseeamessageindicating that the <NOE_ip_address>isreachable.

6.5.2Starting PINGat theHost

PINGcan be run fromthe Ethernethost to determine if the bridge isreachable on

the network.

Setup

The bridge mustbe running in orderforit torespond. If itisnotalreadyrunning,

connectakeyboard and monitorand initializeitasdescribed above.Displaythe

bridge’sC:\>prompt.

Tostartthe bridge enter:GATELOOP

Starting

PINGthe bridge fromthe host: PING<bridge_ip_address>

Youshouldseeamessageindicating that the <bridge_ip_address>isreachable.