Configuration Extensions
124 372 SPU 780 01EMAN May 2002
SY/MAX Extension
Overview The SY/MAX configuration extension allows you to properly access and configure
up to six SY/MAX RIO cards. This extension is only available when using Quantum
controllers revision 2 or later.
Editing the
SY/MAX
Extension
In the Active Extensions panel select the SY/MAX extension, then:
Note: If the SY/MAX extension does not appear in the Active Extensions panel, it
is not a valid extension for the current controller type.
Step Action
1 Select a card (1-6) from the Card drop-down list.
2 Enter a I/O drop number (-1 through 99) in the Module Drop Number field. Set
to -1 if the drop is not defined.
3 Enter the number of the slot (0 through 16) that the RIO card inhabits in the
Backplane Slot field. Set to 0 to remove a module.
4 Enter a retry number (1 through 255) in the Retry Count field.
5 Enter a timeout value (1ms through 65535ms) in the Timeout field.