Schneider Electric 372 SPU 780 01EMAN Networks After selecting Networks from the report options list:, Descriptor Ranges After selecting Descriptor Ranges from the report options list:, Documentation Tables After selecting Documentation Tables from the report options list:

ProWORX 32 Reporting
372 SPU 780 01EMAN May 2002 235
Networks After selecting Networks from the report options list:
Descriptor
Ranges After selecting Descriptor Ranges from the report options list:
Documentation
Tables After selecting Documentation Tables from the report options list:
Step Action
1 Select which networks that are to be printed by typing the numeric range of
networks in the Print Networks box. To select all networks enter "All". To select
no networks enter ‘None’.
2 Select whether you want One Network per Page or Two Networks per Page.
3 If you select One Network per Page, you can then select Cross References to
print all of the cross references that are associated with the particular network,
Network Long Comment to print long comments for the particular network.
Step Action
1 Enter the range of descriptors to be printed for each address type. Valid entries
include: "1-100", "None", and "All".
2 Select Items Used in Logic to print addresses used in logic.
3 Select Items with Descriptions to print addresses that have descriptions.
4 Select All Items to print all coils. This includes all items used in logic and items
with descriptions.
Step Action
1 Select any combination of the following documentation check boxes:
Log Book / Audit Trail
Symbol Table
Page Titles
Short Comments
Long Comments
Cross References