Using the Data Watch Window
372 SPU 780 01EMAN May 2002 187
Adding a Value to Monitor From the right-click menu:Step Action
1 Select Edit Cell.
2 Select the Data Monitor Enabled check box.
3 Enter an address into the Address box. (This address may be the same as or
different than the address associated with the picture.)
4 Click the Foreground button to select the text color.
5 Enter numeric values into the Actual Range boxes. (These are the low and high
values you expect or know the address will hold.)
6 Enter numeric values into the Scale Range boxes. (You can use the scale range
to display a ratio value or an offset value for data analysis purposes. You can
also set the Scale range to the same values as the Actual range to display raw
data.)
7 Select the positioning (Top, Middle, or Bottom) of the caption from the
Alignment drop-down list box.
8 Press OK to save changes.