Using the Logic Editor
144 372 SPU 780 01EMAN May 2002
Configurable Mnemonics

Overview In ProWORX 32, all instruction mnemonics are configurable, so you can use

mnemonics you are already familiar with.

Editing a

Mnemonic From the project right-click menu in the Navigation panel:

Mnemonics

Listing Mnemonic descriptions:

Step Action
1 Select Properties.
2 Select the mnemonic to edit and click Edit or double-click the mnemonic to edit.
3 Type in the new mnemonic.
4 Click outside of the field or press ENTER.
Note: If you try to type an existing mnemonic, ProWORX 32 reverts to the old
mnemonic.
5 Click OK.
Mnemonic Description
NO -] [- Normally Open
NC -]\[- Normally Closed
PTC -]P[- Off to On
NTC -]N[- On to Off
VTO | OPEN Vertical Open
VTS | SHRT Vertical Shunt
HSH -SHRT Horizontal Shunt
CNR -()- Normal Coil
CR -(L)- Latched Coil
SKP SKP Skip Function
UCT UCTR Up Counter
DCT DCTR Down Counter
T1 T1.0 Timer (seconds)
T0 T0.1 Timer (tenths)
T. T.01 Timer (hundredths)
ADD ADD Addition
SUB SUB Subtraction
MUL MULT Multiplication