Schneider Electric ION8800 manual Environmental Specifications IEC62052-11, Installation DANGER

Meter Ground

Terminal

ION8800

Meter

Slot-head

Screws

Environmental Specifications (IEC62052-11)

Mounting Location	Indoor use
Metrological	-10 to +45ºC (14 to +113ºF)
Operating Range	-25 to +55ºC (-13 to +131ºF)
	No formation of ice
Max. Altitude	2000 metres (6562 feet) above sea level
Display Operating Range	-10 to +60ºC (14 to +140ºF)
Storage Range	-25 to +70ºC (-13 to +158ºF)
Relative Humidity Range	5 to 95% non-condensing
Enclosure Rating	IP51 (IEC60529)

Installation

DANGER

Do not power up the meter until the ground terminal is connected -- risk of electric shock.

1.Connect the ground terminal on the rear of the meter to a good earth ground on the rack, using a 3.3 mm2 (12 AWG) wire. Ensure that the terminal nut is tightened down securely onto the ground wire. The wire must be a minimum of 30 cm long (11.8”) to allow racking and unracking.

2.Slide the meter into the DIN standard 43862 rack (half-width 19 inch/ 482.6 mm rack with plug-in Essailec connector).

9.37mm .49”)(1	465 mm (18.31”)	(0.28”)
	451 mm (17.76”)	7 mm

133mm 24”).(5	.571 mm 25”).(2	Cut-out for 482.6 mm (19”)
		Chassis

M6

3.Ensure the rear connector fits tightly.

4.Tighten the 2 slot-head screws (M3 thread) into the front of the meter rack, to hold the meter firmly in place.

Meter Essailec	Rack Essailec
Connector
	Connector

482.6 mm (19”) Rack

14 © 2007 Schneider Electric. All rights reserved.