Schneider Electric ION8800 manual thousands and decimal place holder

Menu

Setting

Description

Range (Values)

Default

	Phase Labels	Specifies how phases are labelled	ABC, RST, XYZ, RYB, 123	123
	PF Symbol	LD (leading)/LG (lagging)	LD/LG, +/-, CAP/IND	LD/LG
	Digit Group	Specifies symbols used to delimit	1000.0 or 1,000.0 or 1000,0	1000,0
		thousands and decimal place holder
Format	Date Format	Specifies how dates are displayed	MM/DD/YYYY, DD/MM/YYYY,	MM/DD/
			YYYY/MM/DD	YYYY
	Show DST	Determines if DST is shown or not	Yes or No	Yes
	Volts Decimal	Number of decimal places	1. to 123 456 789,XXX	1,XX
		displayed for voltages
	Current Decimal	Number of decimal places	1. to 123 456 789,XXX	1,XXX
		displayed for currents
	Power Decimal	Number of decimal places	1. to 123 456 789,XXX	1,XXX
		displayed for power measurements
	Update Rate	Sets when the display updates (in	1 to 6	1
		seconds)
	Contrast	Higher numbers are sharper	0 to 9	7
		Specifies the time it takes (in		300 (five
	Backlight Timeout	seconds) for the backlight to turn off	0 to 7 200 (two hours)
				minutes)
		(0 = the display stays lit indefinitely)
		Controls the minimum allowable	0 (disabled) to 5 184 000	216 000
	DMD Lock	time between consecutive demand
Display			(60 days)	(25 days)
		resets (in seconds)
	TEST Mode TO	in TEST mode before switching back		30 minutes
		Defines how long the meter remains
		to NORM mode
	Display Scale	Determines the scale applied to	1 to 999 999	1000
		displayed parameters
		Specifies whether parameters are
	Scaling Mode	divided or multiplied by the scale	Multiply or Divide	Divide
		before being displayed
	Delta Vectors	Specifies how vector diagrams are	System or Instrument	System
		displayed when in Delta mode
	Modify Passwd	Modifies standard password	0 to 999 999 999	0
Security
	Disable Security	Disables meter security	Disabled or Enabled	Enabled
	Web Config	Allow configuration via web server	Disabled or Enabled	Enabled
	Ack Alarms	Sends a pulse to acknowledge	-	-
		alarms when selected

1A baud rate of 300 bps is only intended for paging applications.

2Serial number = PA-0302B222-01, Unit ID = 2222

3Available on ION8800A and B meters only.

© 2007 Schneider Electric. All rights reserved. 25