WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
Signal Page Description
This section describes the section headings and field descriptions of the Signal page.
Field Name |
| Description |
Downstream/ | Displays the current downstream/upstream status of | |
Upstream Status | the cable modem gateway. There are 5 possible | |
| states: | |
| • | notSynchronized |
| • | phySynchronized |
| • | rangingComplete |
| • | registrationComplete |
| • | operational |
Channel ID | Displays the downstream and upstream channel | |
| number currently being used by your cable modem | |
Frequency | Displays the downstream and upstream frequency | |
| currently being used by your cable modem | |
|
| This frequency is not displayed because of |
| CableHome requirements. | |
Bit Rate | Displays the maximum downstream and upstream | |
| data bit rate your cable modem can handle if | |
| provisioned | |
Downstream Power | Displays the actual received signal power level in | |
Level | dBmV | |
Upstream Power | Displays the actual transmitted signal power level in | |
Level | dBmV | |
Signal to Noise Ratio | Displays the Signal to Noise Ratio of your received | |
| signal in decibels (dB) | |
|
| Any ratio over 25 dB is considered acceptable. |
|
|
|
68
