WebSTAR DPR300 Series Cable Modem Gateway User’s Guide

Configuring the Default Settings

You can use the default settings, or, if your system requires different settings to operate correctly, you can change the default settings using the Setup Basic Settings – Network Configuration page.

If you are not familiar with the network configuration procedures detailed in this section, contact your cable service provider before you attempt to change any of the cable modem gateway default network configuration settings.

Click Network Configuration in the Basic Settings section of the Setup page to access the Setup Basic Settings – Network Configuration page.

Setup Basic Settings – Network Configuration Page Example

The following illustration is an example of the Setup Basic Settings – Network

Configuration page.

44

Page 45
Image 45
Scientific Atlanta DPR300 Series Configuring the Default Settings, Setup Basic Settings Network Configuration Page Example