C1448, C1848, C2148W
Air and Water Cooled User Manual
Panel Removal
1 | Locate and loosen the two screws at the front | Switch Bezel |
| edge of the top panel. |
|
|
| All models ship with the On and Off switches front |
2 | Pull the front panel out at the top until it clears | accessible. if desired, the On and Off switches can |
| the top panel. | be covered up to prevent unauthorized use by |
|
| changing the bezel in the front panel's trim strip. A |
3 | Lift the front panel up and off the machine. | |
4 | Remove two screws at front edge of top | To change bezels: Remove the front panel and |
| panel. | refer to the instruction label on the inside of the |
|
| front panel. Push snaps of the standard bezel in |
5 | Lift up the front of the top panel, push it back | and pull the bezel out of the front panel. Locate |
| an inch, then lift to remove. | other bezel. Push into trim strip from the front until |
|
| it snaps into place. Return the front panel to its |
6 | Locate and loosen the screw holding each | original position and secure it to the cabinet. |
| side panel to the base. |
|
7Pull the side panel forward to release it from the back panel.
5
6
1
5
Panel Removal
November 2006
Page 8
