C1448, C1848, C2148W
Air and Water Cooled User Manual
Uncrate and Set Up
Begin with unpacking the ice storage bin. Remove the carton, and using part of the carton as a cushion, tip the bin on its back to remove the skid and attach the legs or casters.
Note: Turn the leg levelers in all the way and adjust after the ice machine is on top and in its selected location.
Return the bin to an upright position. Check the bin top gasket for gaps and tears, fill any in with food grade sealant prior to placing the ice machine on the bin.
Install the bin top adapter if one is required for the application.
If the ice machine has not been unpacked, do so now. Remove the carton from the skid. Lift the ice machine off the skid directly onto the bin.
Note: The machine is heavy! Use a mechanical hoist if necessary.
Secure the ice machine to the bin with the hardware provided (two metal straps and 4 bolts).
Level the bin and ice machine using the adjustment part of the legs.
Bin Recycling
Many times an ice machine head will be replaced, while the existing ice storage bin will be reused. This is an acceptable practice, if some precautions are taken:
•The used bin must be in good condition. Broken doors, hinges, or warped walls are reason for considering a new bin.
•The used bin top edge gasket must be replaced. Water leaks could occur if the gasket tape is not replaced.
•The used bin should be the proper size for the ice machine head.
November 2006
Page 9
