C1448, C1848, C2148W
Air and Water Cooled User Manual
Plumbing Requirements
All models require connection to cold, potable water. A hand actuated valve within site of the machine is required. Air cooled models have a single 3/8” FPT inlet water connection, a 3/8” FPT to 3/8” male flare adapter is supplied with the machine and can be used if desired.
Water Filters
If connecting to water filtration, filter only the water to the reservoir, not to the condenser. Install new cartridges if the filters were used with a prior machine.
Water Fitting
Inlet Water
Connection
A triple head filter is recommended. Either the Scotsman SSM3 taste and odor filter system, or the
Water cooled models have the same inlet fitting plus an additional 3/8” FPT condenser inlet water connection.
November 2006
Page 10