C1448, C1848, C2148W
Air and Water Cooled User Manual
Electrical
The machine is not supplied with a power cord, one must either be field installed or the machine
The dataplate on the back of the cabinet details the power requirements, including voltage, phase, minimum circuit ampacity and maximum fuse size. HACR type circuit breakers may be used in place of fuses. Extension cords are not permitted. Use of a licensed electrician is recommended.
Electrical connections are made inside the junction box in the back panel of the ice machine.
1Remove the junction box cover and route the power cord through the access hole and properly attach the power supply wires to the leads in the junction box.
2Install a field supplied strain relief per code. Attach a ground wire to the ground connection in the junction box.
3Check voltage when complete.
4Return the junction box cover to its original position and secure with the original screws.
Power
Supply
Wires
Ground Wire
Connection
Install
Strain
Relief
Follow all applicable local, state and national codes.
November 2006
Page 12
